Busassun Matsar Alumina Wear farantin
Game da YIHO Alumina Wear Plate
Ƙara rayuwa da aikin kadarorin ku na aiki.
An ƙera Plates ɗin sawa kuma an kera su don ƙayyadaddun aikace-aikacen da aka yi niyya, tabbatar da cewa koyaushe ana ba da shawarar farantin daidai da shigar da su.
Baya ga siyar da faranti na lalacewa, HICTECH yana ba da damar shigarwa wanda ke ba da gamsuwar abokin ciniki na musamman da ƙima.Taimakawa ta hanyar ƙwararrun ƙwararrun ƙwararrun sabis na kan layi, za mu ɗauki iko da duk aikin ku, daga matakin tunani da kimantawa, ta hanyar samarwa, bayarwa, shigarwa, kulawa da ci gaba bayan sabis na tallace-tallace / tallafi.
An ƙera faranti don dacewa da kowane aikace-aikacen kuma suna da zaɓuɓɓukan gyara daban-daban, faranti masu goyan bayan ƙarfe, walda akan zaɓuɓɓuka da haɗin kai tsaye.
Alumina Ceramic Wear Plates
Ana ƙera Plates ɗin sawa zuwa mafi girman ƙa'idodi da ƙayyadaddun bayanai, yana mai da su sama da kowane samfuri a kasuwa.
Siffofin
• Mafi girman halayen sawa
• Yana lalata tasiri
• Rage surutu
• Yana rage lokacin hutu
• Ƙananan farashin kowace tonne ROI
• Fit don manufa
Alumina Wear Plate Applications
• Cuta
• Masu hobbasa
• Maƙallan canja wuri
• Murkushewa da dubawa
• Milling
• Jirgin kasa da masu lodi
Ƙididdigar Alumina Wear Plate
| Abun ciki | Kauri | Yawan yawa |
| Zirconia taurin Alumina | 12mm, 25mm, 50mm | 4.2gr/cm3 |
| Alumina 92% / 95% Al203 | 3 ~ 75mm | 3.65&3.72gr/cm3 |
| Alumina 92% Al203 / Rubber Na halitta | 8mm-63mm | / |
| Alumina 92% Al203 / Babban Tensile Polymer | 10mm-63mm | / |
| Polyurethane | 3mm-20mm | / |
Shigar da suturar yumbura
1. Manna manne kai tsaye: yi amfani da zazzabin ɗaki ko babban zafin jiki mai ƙarfi manna manne inorganic don shigarwa.Yana da sauƙi don shigarwa kuma ya dace da ƙananan tasiri tare da zafin jiki na aiki a kasa 350 ℃.
2. Stud waldi: ana iya amfani dashi don kayan zafi mai zafi da kayan aiki tare da karfi mai tasiri.Ƙarfin kulle kansa na inji da mannen inorganic na iya tabbatar da cewa layin ba ya faɗi.
3. Prefabricated yumbu liner shigarwa: yumbu bukatar da za a shigar a kan karfe farantin da farko don yin 2-in-1 yumbu liner (ceramic + karfe farantin), ko 3-in-1 yumbu liner (ceramic + roba + karfe farantin). , sa'an nan kuma ta hanyar walda ko ƙugiya don shigar da shi a kan kayan aiki, wanda ke da sauƙin gyarawa da maye gurbin.
Babban Tsaftataccen Alumina mai jurewa lalacewa mai jurewa yumbu Lining Plate
iya maye gurbin manganese karfe liner, wanda zai iya fundamentally warware matsalar lalacewa.Babban zafin jiki mai jure lalacewa yana waldawa a cikin kayan aiki ta hanyar waldar ingarma na ZTA mai kauri mai kauri, ta yadda za'a samar da Layer na kariya mai ƙarfi.Za'a iya ƙirƙira wasu ɓangarorin sikeli akan rufin don ƙara haɓaka juriyar tasirin sa.Don sauƙi na shigarwa da maye gurbin, za a iya ɗora layin yumbu a kan farantin karfe sannan a saka kayan aiki ta hanyar walda ko ƙwanƙwasa.
