Zafin Vulcanization Rubber Ceramic Composite Wear Panels
Zafafan Ƙunƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙwara
YIHO Wear Panel mafita suna da kyau don nau'in ma'adinai iri-iri, sarrafa ma'adinai da kayan aiki don kariya daga matsanancin lalacewa.
A. yumbu da roba vulcanization tsari balagagge kuma abin dogara.
A cikin jiyya na yumbu kafin vulcanization, muna amfani da shigo da Amurka na wakili na jiyya.Kayayyakin vulcanized Ko da an lanƙwasa layin 360 °, yumbu ba zai faɗi daga roba ba.
B. yumbu liner da karfe manna da tabbaci
A cikin layin yumbu da haɗin ƙarfe, muna amfani da ƙarfe da aka shigo da su da mannen roba.Samfurin yana da ƙarfi mai ƙarfi, juriya mai kyau na zafi, juriya na acid da alkali, juriya na lalata, rigakafin tsufa da sauransu.Kamar yadda kamfanina na yumbu na roba ya liƙa manne na musamman, kusan shekaru goma a cikin amfani da ɗaruruwan abokan ciniki, amincin yana da kyau sosai, har ya zuwa yanzu, babu wani samfurin da ya kawar da matsalar.
Matsakaicin zafin jiki na mannewa na halitta na 100 ℃, mafi ƙanƙanta ya rage 50 ℃.Yafi zartar da yumbu roba hade liner manna, saboda karfi mannewa na Organic viscose, yayin da liner da kayan aiki lamba yanki ne babba, sosai dace da babban tasiri, tsanani lalacewa da tsagewar kayan isar da tsarin, kamar ikon shuka ci handling. tsarin, Karfe, smelting sintering shuka da sauransu.
Zafin Vulcanization Rubber Ceramic Composite Wear Panel Application
Misalai na aikace-aikace na yau da kullun:
· Cuta
· Guguwa
· Masu wanki
· Bututu da tankuna
· Mai da wuraren canja wuri
· Gilashin allo, kwanon rufi da abubuwan haɗin gwiwa
· Masu ciyar da girgiza
Zafafan Vulcanization Rubber Ceramic Composite Wear Panels Key fasali da fa'idodi
Mabuɗin fasali da fa'idodi
• 92% Aluminum oxide abu.
• Rubber fili hade da CN polymers.
• Buffed CN bonding Layer da buffed gefuna.
• Girma da nauyi mai iya sarrafawa.Tsari nisa 250mm yana sa sauƙin shigarwa.
• Wuta resistant da antistatic (FRAS) roba fili samuwa.
• Low sulfur roba.
• Fale-falen yumbu masu ɗaure da roba a kowane bangare (sai dai saman saman).
• An ba da shi a cikin murabba'ai 500mm x 500mm.
• Matsananciyar lalacewa.
• Fitacciyar mannewa zuwa tayal yumbura, roba da karfe.
• Don mafi kyawun mannewa mara kyau na sanyi.
Ana iya amfani da su a sama da ƙasa aikace-aikace.
• Tsayayyen taurin roba tare da shekaru.
• Yana tsayayya da fashe fale-falen da kuma cire shi.
• Sauƙi don shigarwa.
Rubber, Ceramic & Karfe Specification
| S.A'a | Kayan abu | Halaye | Kayayyaki |
| 1 | Tiles na yumbu | Kayan abu | 92%, 95%, T95%, 99%, ZTA |
| 2 | Roba | Bangaren | roba na halitta |
| Yawan yawa | 1.4g/cm 3 | ||
| Ƙarfin juzu'i a lokacin hutu | ≥10.6Mpa | ||
| Tsawaitawa a lokacin hutu | ≥350% | ||
| Taurin Teku | 45-65 | ||
| M tsakanin tayal da roba | ≥3.8 Mpa | ||
| M tsakanin roba da kayan aiki | ≥3.58Mpa | ||
| Thermal conductivity.(zazzabi na al'ada) | 2 w/mk | ||
| Lokacin tsufa | ≥15 Shekaru | ||
| Yanayin aiki | -50ºC - 200ºC | ||
| 3 | Farantin karfe | Kayan abu | Q235A |
| Yawan yawa | 7.85g/cm 3 | ||
| Kauri | 3-10 mm | ||
| 4 | M | Bayyanar | Brown glutinous ruwa |
| M abun ciki | 20± 3% | ||
| Dankowar jiki | ≥2.5 Mpa | ||
| Ƙarfin kwasfa | 48h N/2.5cm≥120 | ||
| Ƙarfin matsi | ≥850 Mpa | ||
| Yanayin aiki | -20ºC - 100ºC |
